INSTALL GUIDE


Step 1: Carefully remove sign from crating and double check that everything is intact.	Step 2: Dig two holes with a Post-Hole Shovel down approximately 36 inches and 10 inches wide.

Step 3: Mount poles (both straight and wrap around) to sign with bolts provided in predrilled holes.	Step 4: With two people, lift the sign up carefully and set the sign into the holes.

Step 5: Mix concrete and water in each of the holes. Be sure to have one person hold the sign steady while mixing.	Step 6: Fill the hole with the leftover dirt, packing the dirt very well. Again, have someone steady the sign.